Pallet Racks in Espanola, NM

Pallet racks in Espanola, NM work best when reserve pallets and smaller withdrawals are specified as related but separate tasks. Pallet rack systems provide the storage framework; case-picking equipment addresses a different scale of handling.

Johnnie A. Roybal Industrial Park, South Riverside Drive, and Paseo de Onate anchor small-bay storage planning.

Mixed-SKU inventory benefits from direct pallet access. Selective teardrop rack allows each pallet position to be approached from an aisle, making it a practical starting point when the assortment matters more than deep lanes of identical loads. Count positions by item group before settling on the bay arrangement.

The building’s available height and the forklift’s lift capability limit how many levels can be used. Within those limits, beam spacing should reflect the height of the stored loads. A layout should show the relationship between levels, aisles, and handling equipment rather than just a total number of bays.

Santa Fe Pallet Rack supplies new material and helps define both requirements before specifying the equipment.

Rather than assume every item needs the same opening, describe pallet receipts, parcel or case withdrawals, and the quantity of material that must remain available for replenishment.

Carton flow shelving belongs in the discussion when inventory leaves storage as cases rather than full pallets. Identify those withdrawals separately from reserve loads. The picking arrangement and the pallet arrangement can then be reviewed together without pretending that a pallet opening serves every kind of material movement.

For lab-support parcels and case handling, start with what is picked and what replenishes it. The relevant distinction is the unit handled at each stage. That information helps determine where selective pallet storage is sufficient and where a dedicated case-picking product deserves space in the layout.

Common sizes offer a starting vocabulary for the design conversation. A 48-inch-deep pallet often uses a 42-inch upright, and two 40-inch pallets can fit a 96-inch beam arrangement. A 144-inch beam can accommodate three such pallets; 108-inch beams are another available length to consider.

Do not turn those dimensions into a purchase list until load weights and level spacing are known. The beam rating applies to a pair at a level. An upright frame has a capacity dependent on height and beam spacing. Use the heaviest pallet for the capacity basis and discuss load plaques with the specification.

Provide the pallet size, heaviest load per level, clear height, and building size for a free CAD layout and itemized quote. The exact position count comes from fitting storage and handling access together. A rough floor-area calculation cannot account for the actual truck or the required aisle arrangement.

For initial aisle comparisons, counterbalance trucks commonly call for approximately 12–13 feet, reach trucks 8–10 feet, and very narrow aisle trucks 5–6 feet. Confirm the actual equipment requirements. Cost also varies with position quantity, height, beam capacity, decking, freight, and installation, so compare proposals on their stated configuration.

Send Your Pallet Sizes. Start With a Layout.

Plan your Espanola rack job: clear height, loaded pallet dimensions and forklift reach set the layout.